Filter
Top Products
52
Adjusting the Projector Function (“PRJ-ADJ” Men
u)
Auto Search
Auto Power Off
Auto Restart
ECO + Quiet
Lamp Mode
Audio
Ex. Setting
Reset
Information
Off
Off
Off
Off
Both Lamps
Fan Mode
STANDBY Mode
Standby Audio Out
Filter Message
3D MODE
LAN/RS232C
Network
Normal
Standard
On
500H
LAN
Ex. Setting
Picture SIG-ADJ Video SCR-ADJ
Picture SIG-ADJ Video SCR-ADJ
PRJ-ADJ
PRJ-ADJ
MENU = END
SEL./ADJ. SEL. MENU = END SEL./ADJ. SEL.
Menu operation n Page 41
1
Detecting the Input
Signals Automatically
This function enables the projector to detect
the received signal and to switch the Input
mode automatically when the power is turned
on.
Selectable items Description
On Automatically searches for and
switches to the input mode in
which signals are being
received.
Off Auto Search does not function.
While the “Auto Search” function is detecting
the input signal, pressing a button on the
projector or the remote control stops the “Auto
Search” function. After the “Auto Search”
function fi nishes completely, press the desired
button.
•
Note
2
Auto Power Off Function
Selectable
items
Description
On When no input signal is detected for
more than 15 minutes, the projector will
automatically enter Standby mode.
Off The Auto Power Off function will be
disabled.
3
Auto Restart Function
Selectable
items
Description
On
If the power cord is unplugged from the
outlet or the breaker switch is turned off
when the projector is on, then the
projector automatically turns on when
the power cord is plugged into the AC
outlet or the breaker switch is turned on.
Off The projector does not turn on
automatically when the power cord is
plugged into the AC outlet or the
breaker switch is turned on.
To activate the Auto Restart function, you need to switch
the MAIN POWER switch on the projector to “ON”.
4
Eco+Quiet
Selectable
items
Brightness and Power consumption
On Approx. 83%
Off 100%
When “Eco+Quiet” is set to “On”, the fan
sound and power consumption are lower than
they are when “Off” is selected. (Projection
brightness decreases as shown in the chart.)
•
Note