11
Introduction
Accessories
Remote control
RRMCGA256WJSA
Lithium battery
(CR2025)
UBATL0011TAZZ
Power cord*
RGB/USB cable
(6' (1.8 m))
QCNWGA047WJPZ
Soft case
GCASNA011WJZZ
• Projector manual CD-ROM
UDSKAA045WJN1
• Operation manual (this manual)
Optional accessories
■ 3 RCA to 15-pin D-sub cable (9n10o (3.0 m))
■ Lamp unit
AN-C3CP
AN-XR1LP
Supplied accessories
For U.S., Canada,
etc.
(6' (1.8 m))
QACCDA029WJPZ
For Europe, except
U.K.
(6' (1.8 m))
QACCVA006WJPZ
For U.K., Hong Kong
and Singapore
(6' (1.8 m))
QACCBA015WJPZ
For Australia, New
Zealand and Oceania
(6' (1.8 m))
QACCLA024WJPZ
(1) (2) (3) (4)
* Use the power cord that corresponds to the wall outlet in your country.
• Some of the optional accessories may not be available depending on the region. Please check with
your nearest Sharp Authorized Projector Dealer or Service Center.
Note
Cable tieK2
UBNDTA015WJZZ
• For the RGB/USB
cable
• For the power cord
Carrying the Projector
Using the Soft Case
Tying the Cables
Power cord RGB/USB cable
• You cannot store the supplied
cables within the soft case. When
transporting the projector, pre-
pare a bag for these cables.
Note
• Be sure the projector has cooled down sufficiently before
placing it in the case.
• This soft case is only for storing and carrying the projector.
• Shipping the projector in the soft case as a parcel may cause
damage to the projector. If you send the projector in the carry-
ing case as a parcel, be sure to place it in a sturdy case and
with enough shock absorbing material to avoid any damage.
Info
Tie the cable using the supplied
cable ties.