Sharp XR-1X Projector User Manual


 
15
Introduction
Notes the Use of the Lithium Battery
The signal from the remote control can be re-
flected off a screen for easy operation. How-
ever, the effective distance of the signal may
differ depending on the screen material.
When using the remote control
Be sure not to drop, expose to moisture or
high temperature.
The remote control may malfunction under a
fluorescent lamp. In this case, move the pro-
jector away from the fluorescent lamp.
Usable Range
The remote control can be used to control the
projector within the ranges shown in the illustra-
tion.
Remote control sensor
Remote
control signal
transmitters
Remote control
13n (4 m)
30°
30°
30°
Note
Replacement of lithium battery
Replace with a new battery (CR2025) if remote control operation often fails.
When disposing the battery, follow the recycling or disposal regulations in your community.
CAUTION The battery used in this device may present a risk of fire of chemical burn if mis-
treated. Do not recharge, disassemble, heat above 212°F (100°C) , or incinerate. Replace bat-
tery with the type CR2025 only. Use of another battery may present a risk of fire or explosion.
Dispose of used battery promptly. Keep away from children. Do not disassemble and do not
dispose of in fire.
See page 2 for caution on the lithium battery.
Do not short-circuit, recharge, disassemble, or heat the lithium battery.
Should the lithium battery leak, wipe the battery compartment clean, and then insert a new
battery.
Front view
Rear view
Remote control sensor
Remote control
signal
transmitters
13n (4 m)
30°
30°
30°