Filter
Top Products
Introduction
-9
Projector (Rear View)
Using the Terminal Cover
When the projector is used on a desktop, high mounted or ceiling mounted, attach the terminal cover (supplied)
to hide the connecting cables.
Attaching the Terminal
Cover
1 Align with the tabs on
the projector and
then press the
terminal cover in the
direction of the arrow.
2 Tighten the two
screws on the bottom
of the projector.
Removing the Terminal
Cover
1 Loosen the two screws
on the bottom of the
projector.
2 Raise the terminal cover
and pull it out in the
direction of the arrow.
2 Tighten the screws
1 Loosen the screws
1
2
17
16
62
Intake ventilative hole
AC socket
Intake ventilative hole
62
18
INPUT 2/DIGITAL INPUT
terminal
INPUT 1 COMPONENT
terminals (RCA)
INPUT 4 VIDEO terminal (RCA)
20
DIGITAL INPUT
TYPE switch
15
INPUT 3 S-VIDEO terminal
(4-pin Mini DIN)
23
RS-232C terminal
(9-pin D-sub)
11
Remote control sensor
14
XV_Z200U_E_p04_12.p65 03.10.21, 4:09 PM9