Filter
Top Products
-20
Optional
accessory
DVI cable
Type:
AN-C3DV
(9'10'' (3.0 m))
To DIGITAL INPUT
terminal
DIGITAL INPUT
TYPE switch
DVD player or
DTV decoder
To DVI digital output terminal
DVI cable
(sold separately)
-20
Connecting to Video
Equipment with the DVI
Output Terminal Using
a DVI Cable (DIGITAL
INPUT)
Use the DVI cable when connecting video
equipment with the DVI output terminal such
as DVD players and DTV decoders to DIGITAL
INPUT terminal.
1 Slide the “DIGITAL INPUT
TYPE” switch on the back ter-
minal board to “VIDEO”.
2 Connect the DVI cable to the
DIGITAL INPUT terminal.
3 Connect the other end to the
corresponding terminal on the
DVD player or DTV decoder.
• Secure the connectors by tightening the
thumbscrews.
Note
• Select DIGITAL INPUT mode when con-
necting to video equipment with the digital
output terminal. (See page 31.)
• Make sure to turn both the projector and
the video equipment off before switching
the “DIGITAL INPUT TYPE” switch and
connecting.
Connecting the Projector to Other Devices
XV_Z200U_E_p13_28.p65 03.10.28, 1:53 PM20