Filter
Top Products
On-screen Display
-50
Adjusting the Computer and DVD/DTV Images
AUTO SYNC button
On-screen Display
(ON)
(OFF)
Selected Item
Description
Auto Sync adjustment will occur
when the projector is turned on or
when the input signals are switched,
when connected to a computer.
Auto Sync adjustment is not
automatically performed.
Auto Sync Adjustment
Used to automatically adjust a computer im-
age.
Select whether the image is to be synchro-
nized automatically when switching the sig-
nal with “ON” or “OFF”.
Select “Auto Sync” in the “Fine Sync”
menu on the menu screen.
➝For operating the menu screen, see
pages 38 to 41.
Note
• When the optimum image cannot be
achieved with Auto Sync adjustment, use
manual adjustments. (See page 48.)
• The Auto Sync adjustment may take
some time to complete, depending on the
image of the computer connected to the
projector.
• “Auto Sync” cannot be used in the DIGI-
TAL INPUT mode.
• Auto Sync adjustment is also performed
by pressing
AUTO SYNC
on the remote control.
Checking the Input Signal
This function allows you to check the current
input signal information.
Select “Signal Info” in the “Fine Sync”
menu on the menu screen.
➝For operating the menu screen, see
pages 38 to 41.
Note
• 540P is displayed on the screen when
signal 1080I is inputted during DVI con-
nection.
XV_Z200U_E_p44_50.p65 03.10.28, 1:55 PM50