Filter
Top Products
Page 7
Instructions for Windows 2000, XP and NT
To install FlashLink Program Manager Software on Windows 2000, XP and NT:
*Network Users: See your LAN Administrator.
1. Restart the computer and log on as the Administrator. (You cannot install
the software in of these Windows NT based systems without having
Administrator access).
2. IF you have downloaded the software from www.DeltaTRAK.com
, double
click the FLITFULLx_x.exe icon; (x_x indicates the version #) click “Yes”
to continue. Go to step 8.
3. If you have the Installation CD, insert the In-Transit FlashLink Software
Installation CD into your CDROM drive.
(If the program does not open automatically, follow the instructions below.)
4. Go to Start
5. Choose Run
6. Type D:\Disk1\setup.exe (if the CD Drive is D:\)
7. Press Enter
8. The computer will start loading the program. Read the welcome message
and click on Next to continue.
If you have an error when trying to access the FlashLink logger, insure that you
have administrator privileges before installing the software. If the problem
persists, check the port settings for your computer.