Filter
Top Products
Page 12
Windows XP
To check your port settings in Windows XP, do the following:
1. Go to “Start”.
2. Choose “Control Panel”.
3. Choose “Administrative Tools”.
4. Choose “Computer Management”
5. Double click “Device Manager” in the left quadrant.
6. Double click “Ports (COM & LPT)” icon in the right quadrant.
7. Double click “Printer Port (LPT1)” icon in the right quadrant.
8. Click the “Resources” tab.
This will display the port settings for LPT1 where the FlashLink can be
accessed. They should look something like “0378-037F”, write down “0378”.
Then start your FlashLink Software and select from the top menu “Customize”.
Then click the “Set Port” button. You will see the port-setting value that
FlashLink Software is using in the “Base Address” field. Put the port-setting
value that you wrote down from the above instructions into the “Base Address”
field.