Filter
Top Products
ATA COMMAND BLOCK AND SET DESCRIPTION SSD-HXXX(I)-3650 DATA SHEET
SILICONSYSTEMS PROPRIETARY
This document and the information contained within it is confidential and proprietary to SiliconSystems, Inc.
All unauthorized use and/or reproduction is prohibited.
DOCUMENT: 3650H-02DSR JUNE 17, 2008 PAGE 47
Set Multiple Mode — C6h
The Set Multiple Mode command allows the host to access the drive via Read
Multiple and Write Multiple ATA commands. Additionally, the command sets
the block count (i.e., the number of sectors within the block) for the Read/Write
Multiple command. The sector count per block is set in the Sector Count
register.
Table 49: Set Multiple Mode — C6h
Register
D
7
D
6
D
5
D
4
D
3
D
2
D
1
D
0
Feature X
Sector Count Sector Count
Sector Number X
Cylinder Low X
Cylinder High X
Drive Head X X X Drive X
Command C6h