Filter
Top Products
12
C3X Lumis HOST
10 ON SCREEN MENU
All system functions can be operated from the keypad or
remote control, with the aid of a complete, user-friendly on
screen menu.
INPUTS
The input selection menu is opened by pressing 0 on the
remote control or with the SOURCE key on the projector or
HOST system keypads.
To select an input, scroll through the list with the ▲ and ▼
keys until the required input is highlighted, then press ▶.
Input selection menu display terminates if you press the ESC
key or when the On-Screen Menu display timeout interval
(set in the Setup Menu) has elapsed or after the signal has
been recognised.
Some inputs can receive RGB and YCrCb signals. The input
and type of signal (RGB or YPrPB) are set in the pull down
menu that is displayed to the right of the symbol < when
you press the key ◀.
After selecting the signal that arrives from the source (using
the ▲ and ▼ keys), press MENU+/MENU- to confirm and
exit the pull-down menu; to the right of the < symbol, you
will see the setting you have just entered.
During the short time that it takes to find the signal, a box
will appear showing the
signal requested. Additional infor-
mation regarding the signal such as the video standard (for
video signals) or definition (for graphic signals), the aspect
and the current user memory can be displayed by pressing
the number key on the remote control corresponding to the
selected source.
In the SETUP menu you can select whether or not to display
this information; for further information see SOURCE INFOR-
MATION in the MENU section.
Information on the selected menu can be shown on the front
display of the Host system by pressing the INFO key.
MAIN MENU
Press the MENU key on the keypad or the MENU+ or MENU-
key on the remote control to access the main menu of the On
Screen Display. The main menu is divided into four windows,
PICTURE, IMAGE, SETUP and MENU, in which the various
adjustments are grouped according to the frequency of use.
Use the ▲ and ▼ keys to select the line corresponding to
the adjustment you wish to make.
The various
menus offer only adjustments corresponding to
the type of input signal displayed (e.g. certain typical adjust-
ments for video signals, not necessary for graphic signals, do
not appear on the menus for the latter, and vice versa).
Some adjustments (e.g. Brightness and Contrast) are as-
sociated with a numerical value that can be modified within
the set limits using the ◀ and ▶ keys.
For others (e.g. CINEMA MODE) you can choose between
two options offered on the same line and selectable using
the ◀ and ▶ keys.
Source:
Resolution:
V: 50 Hz
Aspect:
Gamma:
Color Temp:
Brightness:
Contrast:
HDMI 1
1080p50
H: 56.2 MHz
Anamorphic
EN1
D50
51
60
1 VIDEO 1
2 VIDEO 2
3 S-VIDEO 1
4 S-VIDEO 2
5 COMPONENT 1
6 COMPONENT 2
7 COMPONENT 3
: 1 VIDEO 1
: 2 VIDEO 2
: 3 S-VIDEO 1
: 4 S-VIDEO 2
: 5 COMPONENT 1
: 6 COMPONENT 2
: 7 COMPONENT 3
1
2
3
4
5
6
7
Menu
Source List 1/3
on
COMPONENT 4
GRAPHICS 1
GRAPHICS 2
DVI
HDMI 1
HDMI 2
HDMI 3
: 8 COMPONENT
: 9 GRAPHICS RGB
: 10 GRAPHICS RGB
: 11 DVI
: 12 HDMI 1
: 13 HDMI 2
: 14 HDMI 3
8
9
10
11
12
13
14
HDMI 4
HDMI 5
HDMI 6
SDI
: 15 HDMI 4
: 16 HDMI 5
: 17 HDMI 6
: 18 SDI
15
16
17
18
Menu
Picture
Contrast
Color
Tint
Sharpness
Filter
Cinema Mode
50
50
50
3
2
Off Auto
Auto
Noise Reduction
Brightness
60
C3X Lumis HOST_ EN.indd 12 11-02-2009 14:40:32