SkyLink HU-318 Switch User Manual


  Open as PDF
of 34
 
23
PROGRAMMING THE INTERNET HUB
CAMERA
CAMERA PROGRAMMING THE INTERNET HUB
Toviewacamera,pressthe[camera]icon.
1. You will see all the cameras you have programmed.
2.Clickontothecamerathatyouwanttovieworclickon[AllCameraControl]
to view all cameras at the same time.
4. Below the video image, you can see the up, down, left and right buttons.
These buttons allow you to control the pan and tilt the angle of the camera.
5. If you are unable to view the live image properly, please press the
[ChangeMode]buttonandselectthemodethatallowsproper
video playback.
3. Once a camera is selected, it will show the live view of the camera.
 previous next