Filter
Top Products
Connecting a room control system
You can control your interactive flat panel from a room control system.
g To connect your interactive flat panel to a room control system
Connect an RS-232 cable from the room control input on the inside terminal panel of the
interactive flat panel to the serial output on your computer or room control system.
I MPOR TA NT
Do not use a null modem cable. Use only a standard RS-232 cable.
For more information about setting up and programming a room control system, see
Remotely managing your SMARTBoard 8055i interactive flat panel
(smarttech.com/kb/170189).
C HA PT ER 2
Connectingcomputersandperipheraldevices
11|1013787Rev03