Filter
Top Products
Connecting to power and computer 1
g To connect your interactive flat panel to power and computer 1
1. Connect the included VGA cable from your computer to the VGA 1 connector on the
bottom terminal panel.
2. Connect the included USB cable from the USB 1 receptacle on the inside terminal panel to
a USB receptacle on the computer.
3. Connect the included power cable from the AC In connector on the bottom terminal panel
to a power outlet.
4. Connect the power cable from your computer to a power outlet.
5. Turn on your computer.
6. Turn on the main power switch on the bottom terminal panel, and then press the Power
button on the front control panel.
7. Press the VGA 1 button on the remote control.
OR
Press the Input button on the front control panel until the source is VGA 1.
8. Select the USBaudio input source by pressing the AUDIOINPUT button on the remote
control until the source is USB.
9. Acknowledge the welcome screen by touching the screen or by pressing any key on
computer 1’s keyboard
C HA PT ER 2
Connectingcomputersandperipheraldevices
13|1013787Rev03