Filter
Top Products
Default Setup
The Default Setup option automatically allocates necessary I/O
and IRQ resources to the card, then detects and corrects
parameter settings which are in conflict with other devices
installed on the host PC. If you have more than one Plug and
Play card installed and you select Hardware Configuration from
the Program Menu, you will be prompted to specify the card
you want to configure. Select the corresponding Node ID from
the Select LAN Adapter box.
Figure 2-1. Default Setup
CHAPTER 2
HARDWARE SETTINGS
2-1
ISA-FINAL 3/31/98 4:06 PM Page 1-7