Filter
Top Products
Note: If you need to modify the current configuration and
you are in a Jumperless (non-Plug and Play)
environment, return to the Main Menu and select
Manual Setup. In a Plug and Play environment,
select the Default Setup option to automatically set
the parameters. Refer to Chapter 2, “Hardware
Settings” for more detailed information.
5. If you have made changes to the Card Configuration, the
program prompts you to save these changes.
6. Run the Diagnostics.
Select the appropriate option from the Main Menu:
• Diagnose the Adapter
• Diagnose EEPROM
• Run Diagnostics on Network
Refer to Appendix A, “Diagnostics” for a detailed
explanation of the diagnostics.
Note: Run diagnostics before the software driver is loaded
into the system. Otherwise, your system may hang.
7. Select Exit Setup to return to the Program Menu.
QUICK START
viii
ISA-FINAL 3/31/98 4:06 PM Page x