Filter
Top Products
Interrupt (Jumperless Environment only)
Select any available hardware interrupt in the range 2 to 15 from
the displayed list. The card’s default interrupt setting is 3. The
following table lists the XT and AT interrupt settings:
Table 2.2. Commonly Used IRQ Channels
Boot ROM
The card provides an empty socket for an optional 16 KB
boot ROM. If your server provides boot services, the generic
RPL boot ROM permits the client PC to download the disk
operating system (DOS) and network drivers over the network.
A boot ROM for LAN Manager, LAN Server and NetWare Server
is available from your SMC dealer.
HARDWARE SETTINGS
2-4
IRQ XT AT
2 EGA/VGA EGA/VGA
3 COM2 COM2
4 COM1 COM1
5 Hard Disk Parallel Printer Port
10 N.A. Unused
11 N.A. Unused
12 N.A. Mouse for PS/2
15 N.A. Unused
ISA-FINAL 3/31/98 4:07 PM Page 1-10