SMC Networks SMC2652W Network Router User Manual


 
System requirements
Before you install the EZ Connect Wireless Access point, be sure
you can meet the following requirements:
An AC power outlet (100-240V, 50-60Hz)
An available RJ45 port on a 10Base-T Ethernet hub or switch.
802.11 compliant wireless Ethernet adapters with TCP/IP
compatible protocol installed.
Web browser for configuration.
Installation:
1. Select a site - Choose a proper place for your SMC2652W
Access point. In general, the best location to place the access
point is at the centre of your wireless coverage area, within
line of sight to all your mobile stations.
2. Attach the Antenna - Screw the antenna into the antenna
connector (ANT) on the back panel. Normally, the higher you
place the antenna, the better the performance.
English
English
Applications
The EZ Connect Wireless products offer a fast, reliable and cost
effective solution for wireless client access to the network in
applications such as:
Remote access to corporate network information - Email,
file transfer and terminal emulation
Difficult to wire environments - Old buildings and open areas
where wiring is difficult
Frequency changing environments - Retailers, manufacturers
and banks who frequently rearrange the workplace and
change location.
Temporary LANS for special projects - Trade shows, exhibitions
and construction sites which need temporary set up for a short
time period.
Home users - Home users and people who work from home who
need easy and quick installation of a small computer network.
LED Indicators
The EZ Connect Wireless Access point includes five status LED
indicators, as shown below.
USER GUIDE 2652W_UK.qxd 5/4/01 11:08 am Page 5