Filter
Top Products
Key entry - This field can be set to “passphrase” or “manual
Entry”. Select “Entry”. The “passphrase” means the key elements
will be auto generated by the internal algorithym according the
string defined in the passphrase field. The “Manual Entry” means
the key elements allow/need user key in by manually. (2
hexadecimal digitals in each block)
Passphrase - The security key for WEP encryption is generated
from your Passphrase string, so it should be the same as all the
otherstations in your network.
64-Bit manual Entry:
Key1-4 - each key ID contains 10 HEX digits. All wireless devices
must have the same key ID elements values to communicate.
Key ID - Choose the Key ID that has the encryption string you
prefer. All wireless devices must have the same Key ID element
values to communicate.
Key 1 - Key ID value contains 26 HEX digits. All wireless devices
must have the same key ID element values to communicate.
The TCP/IP settings page allows you to view and change the
network settings on the access point.
With DHCP “ON”, the IP address and subnet are set automatically.
If you want to set these yourself, enter a new IP address and
subnet mask in the “New settings” section of the “TCP/IP settings”
screen, then click on “Apply”.
In the change password screen you may change the password on
the access point. As password is required to configure the
SMC2652W Access point. We suggest changing your password
from the default to ensure network security.
English
English
USER GUIDE 2652W_UK.qxd 5/4/01 11:08 am Page 11