Filter
Top Products
C
ONFIGURING
Q
UALITY
OF
S
ERVICE
P
ARAMETERS
14-7
• After using the policy map to define packet classification, service tagging,
and bandwidth policing, it must be assigned to a specific interface by a
service policy (page 14-10) to take effect.
Command Attributes
Policy Map
• Modify Name and Description – Configures the name and a brief
description of a policy map. (Range: 1-16 characters for the name; 1-256
characters for the description)
• Edit Classes – Opens the “Policy Rule Settings” page for the selected
class entry. Modify the criteria used to service ingress traffic on this page.
• Add Policy – Opens the “Policy Configuration” page. Enter a policy
name and description on this page, and click Add to open the “Policy
Rule Settings” page. Enter the criteria used to service ingress traffic on
this page.
• Remove Policy – Deletes a specified policy.
Policy Configuration
• Policy Name — Name of policy map. (Range: 1-32 characters)
• Description – A brief description of a policy map. (Range: 1-256
characters)
• Add – Adds the specified policy.
• Back – Returns to previous page with making any changes.
Policy Rule Settings
- Class Settings -
• Class Name – Name of class map.
• Action – Shows the service provided to ingress traffic by setting a CoS,
DSCP, or IP Precedence value in a matching packet (as specified in
Match Class Settings on page 14-3).