A
CCESS
C
ONTROL
L
IST
C
OMMANDS
23-24
• If a port is already bound to an ACL and you bind it to a different
ACL, the switch will replace the old binding with the new one.
• You must configure a mask for an ACL rule before you can bind it to
a port.
Example
Related Commands
show mac access-list (23-19)
show mac access-group
This command shows the ports assigned to MAC ACLs.
Command Mode
Privileged Exec
Example
Related Commands
mac access-group (23-23)
ACL Information
This section describes commands used to display ACL information.
Console(config)#interface ethernet 1/2
Console(config-if)#mac access-group jerry in
Console(config-if)#
Console#show mac access-group
Interface ethernet 1/5
MAC access-list M5 in
Console#
Table 23-4 ACL Information Commands
Command Function Mode Page
show access-list Show all IPv4 ACLs and associated rules PE 23-25
show access-group Shows the IPv4 ACLs assigned to each
port
PE 23-25