M
ULTICAST
VLAN R
EGISTRATION
15-15
Web – Click MVR, Configuration. Enable MVR globally on the switch,
select the MVR VLAN, add the multicast groups that will stream traffic to
attached hosts, and then click Apply.
Figure 15-6 MVR Global Configuration
CLI – This example first enables IGMP snooping, enables MVR globally,
and then configures a range of MVR group addresses.
Displaying MVR Interface Status
You can display information about the interfaces attached to the MVR
VLAN.
Field Attributes
• Type – Shows the MVR port type.
• Oper Status – Shows the link status.
Console(config)#ip igmp snooping 33-2
Console(config)#mvr 33-16
Console(config)#mvr group 228.1.23.1 10
Console(config)#