Filter
Top Products
C
ONFIGURING
THE
S
WITCH
3-158
• Trunk Member – Indicates if a port is a member of a trunk. To add a
trunk to the selected VLAN, use the last table on the VLAN Static
Table page.
Web – Click VLAN, 802.1Q VLAN, Port Configuration or VLAN Trunk
Configuration. Fill in the required settings for each interface, click Apply.
Figure 3-65 VLAN Port Configuration
CLI – This example sets port 3 to accept only tagged frames, assigns
PVID 3 as the native VLAN ID, enables GVRP, sets the GARP timers,
and then sets the switchport mode to hybrid.
Console(config)#interface ethernet 1/3 4-168
Console(config-if)#switchport acceptable-frame-types tagged 4-236
Console(config-if)#switchport ingress-filtering 4-237
Console(config-if)#switchport native vlan 3 4-238
Console(config-if)#switchport gvrp 4-251
Console(config-if)#garp timer join 20 4-252
Console(config-if)#garp timer leave 90 4-252
Console(config-if)#garp timer leaveall 2000 4-252
Console(config-if)#switchport mode hybrid 4-235
Console(config-if)#