Filter
Top Products
B
ASIC
C
ONFIGURATION
3-25
Downloading Configuration Settings from a Server
You can download the configuration file under a new file name and then
set it as the startup file, or you can specify the current startup
configuration file as the destination file to directly replace it. Note that the
file “Factory_Default_Config.cfg” can be copied to the TFTP server, but
cannot be used as the destination on the switch.
Web – Click System, File, Configuration. Enter the IP address of the
TFTP server, enter the name of the file to download, select a file on the
switch to overwrite or specify a new file name, and then click Transfer
from Server.
Figure 3-10 Downloading Configuration Settings from a Server
If you download to a new file name, then select the new file from the
drop-down box for Startup Configuration File, and press Apply Changes.
To use the new settings, reboot the system via the System/Reset menu.
Figure 3-11 Selecting the Startup Configuration File