Filter
Top Products
C
OMMAND
L
INE
I
NTERFACE
4-174
combo-forced-mode
This command forces the port type selected for combination ports 21 - 24.
Use the no form to restore the default mode.
Syntax
combo-forced-mode mode
no combo-forced-mode
mode
• copper-forced - Always uses the built-in RJ-45 port.
• copper-preferred-auto - Uses the built-in RJ-45 port if both
combination types are functioning and the RJ-45 port has a
valid link.
• sfp-forced - Always uses the SFP port (even if a module is not
installed).
• sfp-preferred-auto - Uses SFP port if both combination types
are functioning and the SFP port has a valid link.
Default Setting
sfp-preferred-auto
Command Mode
Interface Configuration (Ethernet)
Example
This forces the switch to use the built-in RJ-45 port for the combination
port 10.
shutdown
This command disables an interface. To restart a disabled interface, use the
no form.
Syntax
[no] shutdown
Console(config)#interface ethernet 1/10
Console(config-if)#combo-forced-mode copper-forced
Console(config-if)#