Filter
Top Products
Account list
As new dial-in user accounts are added, they are displayed on the updated Account List.
To modify a password for an existing account, select the account in the Account List and
enter the new password in the New Password and Confirm fields. Click Apply under
the Delete or Change Password for the Selected Account heading, or click Reset if
you make a mistake.
To delete an existing account, select the account in the Account List and check Delete
under the Delete or Change Password for the Selected Account heading. If changes
to the user account are successful, the change is shown on the Dial-in Setup screen . If
the change is unsuccessful, an error is reported as shown in the following figure:
Figure 4.4 Dial-in password error
When you have finished adding and modifying user account details, you can configure
other SnapGear appliance functions by selecting the appropriate item from the Network
or System menus. You can also apply packet filtering to the dial-in service as detailed in
Chapter 6, Firewall.
Warning
If you have enabled a SnapGear appliance COM port for dial-in, this port cannot be used
simultaneously for dial-out activities (e.g. dial-on-demand Internet connection). If a port is
set-up for Internet access, and is later enabled for dial-in, the Internet access function is
automatically disabled.
Dial-in server configuration
44