Filter
Top Products
Windows NT
From the Dial-Up Networking dialog, click New and select the Basic tab.
In the Entry name field, enter SnapGear appliance or a similar descriptive name and
click Next.
Enter the SnapGear appliance’s PPTP IP address into the Phone Number field.
Warning
Note that this IP address may change if your ISP uses dynamic IP assignment.
In the Dial Using dialog box, select RASSPPTPM (VPN1) and click Next.
Click More and select Edit entry then Modem properties from the menu.
Select the Server tab.
Select TCP/IP only.
Warning
Do not select NetBEUI or IPX. If an unsupported protocol is selected, an error message
is returned.
Select the Security tab and select Accept only Microsoft encrypted authentication.
Click OK.
Your VPN client is now set up correctly.
Virtual Private Networking
81