Filter
Top Products
STEP 5: Assign a Trigger Button
Follow the appropriate directions for your device and refer to your device’s
user documentation to assign a trigger button for the CF Scan Card.
Note:
• If SocketScan is not running yet, then pressing the assigned trigger
button is a quick way to launch SocketScan. Pressing the trigger
button will fire the laser only when SocketScan is open.
• If it is inconvenient or impossible for you to assign a hardware button
on your device, you can install SocketScan Trigger from the installation
CD to place a software trigger button on your screen.
Pocket PC
These instructions are for a Pocket PC 2000/2002/2003/2003SE.
1. Go to Start | Settings | Personal | Buttons.
2. From the Button list, select a button to trigger the CF Scan Card.
In the Button assignment field, select SocketScan. When done, tap ok.
Note: For maximum ergonomic
placement, choose a button
located directly beneath your
thumb or forefinger when you
hold the Pocket PC. The Voice
Record button is a good choice
for many Pocket PCs.
12