Filter
Top Products
English
1188
3.2 Totalising and batching
Totalising means that the individual items are weighed one after the other,
the weight is added in the total memory and the scale is then
clipped off again at the end of each weighing operation.
Batching means that the weighed items remain on the scale,
the weight is added in the total memory and the scale then
returns to zero without clip off. It is not possible to change measuring points
during a batching operation.
The choice between totalising and batching is defined in Setting mode.
This selection applies to all connected weighing platforms.
As an example, we will only describe the totalising function here.
Total memory with several connected scales
A central total memory is managed for all connected scales.
Total memory capacity There are a maximum of 999 weighing operations
in the total memory. The total memory must then be cleared.
3.2.1 Function key
The totalising/batching function is executed by pressing the F key.
3.2.2 Display view
After each totalising operation, the message "Totalising executed" appears
for 1.5 s in the display.
Ba_3020_GB.qxd 21.06.2007 19:08 Seite 18