Filter
Top Products
22
Initializing the Network Setting
Initializing the
Network Setting
All the network settings that were
configured can be reset to the factory preset
values.
1 Press the MENU key on the remote
commander to display the menu.
2 Press the v/V/b/B key to select “To
Network Setting” in the Network
Setting menu then press the ENTER
key.
The Network Setting menu appears.
3 Press the v or V key to select
“Common Setting” then press the
ENTER key.
The Common Setting menu appears.
4 Press the v or V key to select
“Initialize Network Setting” then
press the ENTER key.
The Initialize Network Setting dialog
box appears.
5 When you want to reset the settings,
press the b or B key to select “OK”
then press the ENTER key.
The dialog box to confirm the
initialization appears.
6 Press the ENTER key.
All the settings for the network are
initialized, and the Common Setting
menu is restored.
7 Select “Close” then press the ENTER
key.
The Network Setting menu is restored.
8 Press the MENU key to quit this
setting.
Select:
Set: Exit:
Network Setting
IP Address Setting
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Auto (DHCP)
. . .
. . .
. . .
. . .
. . .
Common Setting
Wireless Network
Wired Network
SonyProj9980B8
Common Setting
Exit:
Select:
Set:
Projector Password
Projector Name
Initialize Network Setting
Not required
Close
Initialize Network Setting
Reset OK?
OK Cancel
Initialize Network Setting
Reset complete.
OK