Filter
Top Products
30
Monitoring and Operating the Projector Using a Web Browser
1 Start a browser of the computer
(Internet Explorer 5.0 or higher).
2 Enter the address “http://
xxx.xxx.xxx.xxx” (IP Address of the
projector), to establish access to the
projector.
If the browser of your computer is set to
[Use a proxy server] when you have access
to the projector from your computer, click
the check mark to set accessing without
using a proxy server.
After you have established access to the
projector, the following window
appears:
Click [Information].
You can confirm the current settings of the
projector on the computer. You cannot
change the settings of the computer with this
window.
Accessing from the Computer
Note
Confirming the Information
regarding the Projector—
Information