Filter
Top Products
33
Monitoring and Operating the Projector Using a Web Browser
Using the Network Features
Time Server
Enter the address of the time server to obtain
an accurate time information automatically.
Password
You can set the name and password for
[Administrator] and for [User]. The name of
the administrator is preset to “root.”
• To change the password, enter a new
password after deleting the password
(*****) that was set.
• If you forget your password, consult
qualified Sony personnel.
Mail Report
You can use the Mail Report function to do
the following:
• Periodically report the installation status
of the projector and owner information.
You can also specify the transmission days
of e-mail messages (Regular Report).
• Immediately send e-mail if any error
occurs with the projector (Error Report)
• Notify by e-mail of the replacement timing
of the projector lamp when use of the lamp
has reached the preset time (Lamp
Reminder)
• Notify by e-mail that maintenance of the
projector is required when use of the
projector has reached the preset time
(Maintenance Reminder)
x Report Timing field
Regular Report
A report on the present status, installation
status, etc. of the projector is periodically
sent by e-mail.
Set the timing for sending e-mail messages
as follows:
AT: Specify the time when e-mail is to be
sent. You can set the time by the hour.
Every Week on Days: Check this check box
to have e-mail sent on the selected days
every week.
Mon/Tue/Wed/Thu/Fri/Sat/Sun: Specify
the days of the week when e-mail is to be
sent. You can check two or more days of
the week.
Notes