Filter
Top Products
24
Chapter 2 Menu
4 Repeat steps 2 and 3 until the desired menu is
displayed.
For more information about setting and adjustments,
see below.
To abort menu operation
Press the MENU button. The menu of the upper level
is displayed.
The setting or adjustment being performed is canceled,
and data loading or saving is aborted.
If “NG” or “ERROR” appears during menu
operation
Press the MENU button to return to the menu in use.
Enters numerical
values.
[ ↓ ] indicates that
the menu
continues onto
next page.
[ ↑ ] indicates that
the menu is
continued from
previous page.
Selects from
various options.
Indicates that
this item has
sub-list. Thus,
you can go to the
lower level.
...
APERTURE OFF
VALUE 100
10 CH
INPUT CONFIGURATION ↑↓
FORMAT... YP
B
P
R
SLOTNOSLOT2
INPUTNO1
YCSEP 3LINES COMB
SYNC MODE INT
SCREEN MODE 4:3-NORM
SAFE AREA DISPLA
MOD
Y OFF
E
p
...
APERTURE OFF
VALUE 100
10 CH
INPUT CONFIGURATION ↑↓
FORMAT... YP
B
P
R
SLOTNOSLOT2
INPUTNO1
YCSEP 3LINES COMB
SYNC MODE INT
SCREEN MODE 4:3-NORM
SAFE AREA DISPLA
MOD
Y OFF
E
p
Choosing one of two or more selections
Selecting in yellow text
1 Using the UP/DOWN buttons or PHASE knob,
move the cursor to the desired item and press the
ENTER or Ent button.
The selected item is displayed in yellow text and
set to setting mode.
2 Using the UP/DOWN buttons or PHASE knob,
change the setting.
3 Press the ENTER or Ent button.
The setting is confirmed (The item is displayed in
white text again).
Selecting from the setting list
1
Using the UP/DOWN buttons or PHASE knob, move
the cursor to the desired item in the setting list.
2 Press the ENTER or Ent button.
The display returns to the menu of the upper level,
and the selected setting is executed.
SCREEN MODE
4:3-NORM
4:3-UNDR
16:9-NORM
16:9-UNDR
p
Basic Menu Operations