Filter
Top Products
5
Location and Function of Controls
Overview
Remote Commander
Control Panel
a Turning on the power/Going to
standby mode
?/1 (On/Standby) key
b Selecting an input signal
(page 11)
INPUT key
c Operating a menu (page 19)
MENU key
RESET key
ENTER /V/v/B/b (arrow) keys
RETURN key
This function is not provided in this
projector.
d Adjusting the image (page 12)
ASPECT key
KEYSTONE key
PATTERN key
APA (Auto Pixel Alignment) key
*
* Use this key when inputting a computer
signal via the RGB input connector
(INPUT A/INPUT B).
e Using various functions during
projecting
D ZOOM (Digital Zoom) +/– key
*1
Enlarges a portion of the image while
projecting.
1 Press the D ZOOM + key to display
the digital zoom icon on the projected
image.
2 Press the V/v/B/b keys to move the
digital zoom icon to the point on the
image you wish to enlarge.
3 Press the D ZOOM + key or the D
ZOOM – key repeatedly to change the
enlargement ratio. The image can be
enlarged up to 4 times.
Press the RESET key to restore the
previous image.
PIC MUTING key
Cuts off the image. Press again to restore
the image.
AUDIO MUTING key
Mutes the audio output. Press again to
restore the previous volume.
VOLUME +/– key
For adjusting the volume output.
FREEZE key
*2
Pauses a projected image. Press again to
restore the image.
*1: Use this key when inputting a
computer signal. But it may not be
used depending on the resolution of
the input signal.
*2: Use this key when inputting a
computer signal.
Remote Commander and Control Panel
2
3
4
5
6
1
4
7
INPUT
MENU
APA ECO MODE
RETURN
ASPECT
D ZOOM
KEYSTONE
ENTER
VOLUME
PATTERN
FREEZE
PIC MUTING
AUDIO MUTING
RESET
21336
Note
Notes