Filter
Top Products
184
The malfunctions shown in the left-hand column below, labelled “Fault,” do not necessarily indicate functional
faults of the machine. It is therefore advisable to refer to the “Checking” shown in the right-hand column before
calling for service.
Error message table
Fault Checking
The display won’t be illuminated even when
the mode switch is turned to any other
position than “OFF”.
• Is power supplied to the electrical outlet?
• Is the power cord plug out or loosely connected to the
electrical outlet?
(1)
The display is illuminated, but the whole machine
refuses registrations.
• Is a cashier code assigned to the register?
• Is the mode switch set properly at the “REG” position?
(2)
No receipt is issued. • Is the receipt paper roll properly installed?
• Is there a paper jam?
• Is the receipt function in the “OFF” status?
• Is the print head release lever at the printing position?
(3)
No journal paper is taken up. • Is the take-up spool installed on the bearing properly?
• Is there a paper jam?
(4)
Printing is unusual. • Is the print head release lever at the printing position?
• Is the paper roll properly installed?
(5)
Before calling for service
8
Text
Description
In default of
no. programming
1 Registration error ENTRY ERROR
2 Misoperation error MISOPERATION
3
Desired code is not
NO RECORD
programmed yet.
4 (Reserved)
5 Secret code error SECRET CODE
6 Code is not free NOT FREE
7 Memory is full. MEMORY FULL
8 Insert slip paper. INSERT SLIP
9
The entered cashier’s code
NO AUTHORITY
is not authorized.
10 Stock is empty. OUT OF STOCK
11
Compulsory pushing
SBTL COMPUL.
the subtotal key
12 Compulsory tendering TEND COMPUL.
13 Compulsory PBLU entry PBCOMPUL.
14-19 (Reserved)
20 Remote printer off line OFF LINE
21 (Reserved)
22 Overlapped cashier error CASHIER ERR.
23-26 (Reserved)
27 Power off POWER OFF
28-30 (Reserved)
31 Compulsory non-add code # COMPULSORY
32 The cashier is not assigned. NOT ASSIGNED
33 (Reserved)
34 Overflow limitation OVER LIMIT.
35
The open price entry is
INH. OPEN PR
inhibited.
36
The unit price entry is
INH. UNIT PR
inhibited.
The direct non-tendering
37 finalization after previous NOT NON-TEND
tender entry is inhibited.
38 Read error of scale data SCALEERROR
Text
Description
In default of
no. programming
39-50 (Reserved)
51 Weight on scale WEIGHT
52-53 (Reserved)
54 Entry of tare weight ENTR TARE WT
55-60 (Reserved)
61
Desired code is not programmed
NO RECORD
yet. (learning function)
6
2 Enter price and dept. no. PRICE → DEPT
63 Enter price and dept. no. PRICE& DEPT
64 Enter dept. no. ENTER DEPT#
65-66 (Reserved)
67 REG buffer is full. BUFFER FULL
68-69 (Reserved)
70 Price entry at UPC refund ENTER PRICE
71-73 (Reserved)
74 Non-accessed UPC delete job D E L E T E
75 (Reserved)
76
Closing the drawer is
CLOSE DRAWER
compulsory.
77-78 (Reserved)
79
Reading of undefined vender
OP ENTER
coupon UPC
80 (Reserved)
81
Message for prompting entry
ENTR SECRET#
of secret code
82-83 (Reserved)
84 Data backup send success SENDOK
85 Data backup receive success RECEIVE OK
86
Data backup communication
COM. ERROR
error
87 Backup data format error DATA ERROR
88 Data backup time out error TIME OUT
89-93 (Reserved)
94 Age limitation error AGE ERROR
ER-A410/A420(SEC)-5 03.12.22 0:23 PM Page 184