Sony MKS-2010 Switch User Manual


 
168 Other Settings
Chapter 9 System Settings
2
Select the output port number for which you want to
make the setting.
Press directry on the list in the status area.
Use the arrow buttons to scroll the reverse video
cursor.
Turn the knob.
a) Values 5 to 8 are only valid when the MKS-2110M (option) is
installed.
The selected output port number appears in reverse
video.
3
Press [Output Clip].
4
Turn the knobs to adjust the parameters.
To reset the settings to the default values
Press [Default]. All parameters, White, Dark, and
Chroma for the output signal currently being set are
returned to their default values.
Making vertical blanking width and
through mode settings
1
From the top menu, select Setup/Diag >Input/Output
>V Blank/Through.
The V Blank/Through menu appears. The status area
shows the output port numbers, and for each port the
assigned output signal, vertical blanking width, and
through mode setting.
2
Select the output port number for which you want to
make the setting.
Press directry on the list in the status area.
Use the arrow buttons to scroll the reverse video
cursor.
Turn the knob.
a) Values 5 to 8 are only valid when the MKS-2110M (option) is
installed.
The selected output port number appears in reverse
video.
3
Press [V Blank].
4
Turn the knobs to adjust the parameters.
a) When signal format is 480i/59.94
b) When signal format is 576i/50
c) For any signal format with valid scan lines of 1080i or 1080PsF
d) When signal format is 720p/59.94
To reset the settings to the default values
Press [Default].
5
To carry out the through mode setting, press [Thru
Mode], toggling it between Enable and Disable.
Enable: Enable the through mode.
Disable: Disable the through mode.
Notes
The through mode setting can only be made for the
following output signals.
Knob Description Setting
values
1 (No) Output port number selection
1 to 8
a)
Knob Description Setting
values
2 (White) Luminance signal white clip
value
90.00 to
109.02
3 (Dark) Luminance signal dark clip
value
–6.85 to
+10.00
4 (Chroma) Chrominance signal clip
value
90.00 to
113.17
Knob Description Setting
values
1 (No) Output port number selection
1 to 8
a)
Knob Description Setting
values
2 (Mask End) Last line of vertical
blanking interval
10 to 19
a)
6 to 22
b)
7 to 20
c)
7 to 25
d)