Filter
Top Products
25Accessing Menus
Chapter
Using Menus
Accessing Menus
The menus of this switcher enable you to make system settings and settings
related to effects.
To access menus, you can use any of the following three methods.
• Access from the top menu (see next section)
• Access by double clicking (see page 26)
• Access by single clicking (see page 28)
Accessing Menus From the Top Menu
By pressing a top menu selection button in the menu control block (see page
23), you can directly access the menu page for that button. The menus which can
be accessed with top menu selection buttons are as follows.
a) The most recently used menu is displayed.
b) Currently not supported.
To access a menu from the top menu, proceed as follows.
Menus accessed with top menu selection buttons and their functions
Button Menu Function Reference
page
TOP/SHUTDOWN Top/Shutdown Display the top menu, and
exit the menu system.
Page 42
REG
Register
a), b)
Make register settings. –
FILE
File
a)
Make file settings. Page 137
SET UP
Setup/Diagnosis
a)
Make settings related to
setup, and to display of
error status and error
logs.
Page 153
DIAG Diagnosis Display error status and
error logs.
“Error
Messages”
in the
Appendix
(separate
document)