Sony MKS-2010 Switch User Manual


 
Chapter 5 Basic Operations
60 Selecting Effects
5
Press the button for the desired pattern.
The effect pattern is confirmed, the popup window closes, and you are
returned to the Main menu.
Effect Types
About effect pattern numbers
The effects available on this system can be selected with 4-digit effect pattern
numbers. These numbers can generally be classified as shown below. In general
this manual calls all effects simply as “effects,” but when it refers to effects used
on the PGM/PST bank, it calls them as “wipes.”
a) DME option must be installed.
Note
Effects numbered 1001 and higher cannot be used when:
Multiple next transition selections have been made.
Key priority ([KEY PRIOR]) has been selected as the transition type.
Transition effects and non-transition effects
Effects numbered 1001 and higher fall into the following two types, depending
on what occurs when the effect is executed.
Transition effects (slides, page turn, etc.): A bus and B bus cross-points are
switched by executing a transition. Also, when border, cropping, or other
modifications
1)
have been added, they disappear as soon as the transition
ends.
1) Modifications listed in “Effect Pattern Transformations and Modifications” in the Appendix
(separate document).
Yes: Available for use No: Not available for use
Type Effect
pattern
numbers
M/E PGM/PST
Wipes 0001 to 0661 Yes Standard group patterns
only (0001 to 0024)
NAM 0901 Yes Yes
Super mix 0902 Yes Yes
Effects using
DME
1-channel effects 1001 to 1999
Ye s
a)
No
2-channel effects 2001 to 2999
Ye s
a)
No