Filter
Top Products
Connecting peripheral devices
PC card modem*
Sony Notebook Computer User Guide
64
nN
To connect the docking station to your computer
Connect the docking station to the docking/FDD connector on the back of your
computer.
1
Open the cover of your computer.
2
Attach the left side tab of the docking station to the left side hollow of your
computer.
3
Push the tab into the hollow firmly until it clicks.
✍
Use the docking station only
with the PCGA-AC19V AC
adapter, supplied with your
notebook computer.
When a charged battery is
inserted in your computer, you
can attach the docking station
without turning off the
computer.
When attaching your computer
to the docking station, do not
attempt to insert or remove the
battery pack. Lifting and
turning the computer with the
attached docking station may
cause a temporary loss of
power.
To disconnect your docking
station completely from the
mains voltage, unplug the AC
adapter.
Please make sure that the
socket outlet is easily accessible.
Docking/FDD connector