Filter
Top Products
Getting Help
Troubleshooting
Sony Notebook Computer User Guide
99
nN
About peripherals
I cannot use DV devices. The message "DV equipment seems to be disconnected or turned
off" appears.
❑
Check that the DV device is turned on and that the cables are properly connected.
❑
If you are using multiple i.LINK™ devices, the combination of the connected
devices may cause unstable operation. In this case, turn off the power to all
connected devices and disconnect unused devices. Check the connection and
then turn on the power again.
My PC card is not working
❑
Make sure the PC card is compatible with your version of Windows
®
.
❑
Use the Sony Notebook Setup utility to disable devices you are not currently
using.
I cannot print.
❑
Check that all the cables of the printer are correctly connected.
❑
Check that your printer is correctly configured and that you have up to date
drivers If needed, contact your dealer.
❑
The default setting for the printer port mode is correct for most printers. If you
cannot print, try changing the printer port mode. In Sony Notebook Setup, select
the Printer tab. If the printer port mode is set to ECP, change it to bi-directional.
If the printer port mode is set to bi-directional, change it to ECP. Please refer to
"Sony Notebook Setup" in your Software Guide for details on how to configure
the system.