Filter
Top Products
Using Smart Utilities
Using Smart Capture
About the Software on your Notebook Computer
14
nN
Using Smart Utilities
Using Smart Capture
Your computer includes a built-in "MOTION EYE" camera. You can use the camera
software to shoot still images and record video clips.
Capturing a still image
1
Press the CAPTURE button. The Smart Capture application starts.
2
The finder window appears.Turn the MOTION EYE lens towards the subject.
3
Adjust the focus ring.
4
Half-press the CAPTURE button on the computer. The image remains still for a
few seconds. To display another image, release the CAPTURE button and press
again.
5
Fully press the CAPTURE button. The Still Viewer window will open and the
captured still image appears in the Still Viewer window.
6
To end Smart Capture click the button in the top right corner of the window.
✍
Do not touch the camera lens.
Do not point the camera
towards the Sun. Doing so
may cause damage to the
camera.
✍
See the Smart Capture
software on-line help for more
information on installation and
use.
You can capture the following
still images sizes : 640 x 480,
320 x 240, 160 x 120, 80 x
60, and 40 x 30 pixels.
When capturing a small
resolution image (i.e. 80 x 60
or 40 x 30 pixels) , the
displayed image on the finder
window may appear blurred.
A gap may appear when a
rapid-moving object is
displayed. However this is not
a malfunction.
If you turn the lens inwards,
Smart Capture goes into mirror
mode. You can use the mirror
mode, to take a video clip of
yourself. A mirror-image
appears in the finder window
of the display while shooting,
however, after capturing a
normal image appears.