Filter
Top Products
About the Software on your Notebook Computer
Customizing Your Notebook Computer
Selecting the Display Mode
38
nN
Using a CRT or Projector
When you select CRT/Projector as the display mode, you can make additional
settings, described as follows:
1
After selecting CRT/Projector as the type of external display (step 6 in "Selecting
the display mode"), click Advanced Settings.
2
Click the External Display Options tab.
3
Select the following options:
External Display Device:
Monitor Settings:
CRT
Connects with the external computer
display.
Projector
Connects with the projector.
Independent Display
Timing
Click to place a checkmark when you want
to set the resolution and refresh rate
differently from the computer's LCD. To
change the resolution and refresh rate, see
the notes to step 6 in "Selecting the display
mode"
.
✍
If you select CRT/Projector and
turn off the LCD, you can use
the Refresh Rate slider to
change the display's horizontal
frequency. This setting can be
made only for CRT display. If
you select Independent Display
Timing, you can change both
the resolution and the refresh
rate.(see page ).
✍
You cannot select Independent
Display Timing when the
display is set to True Color (24
bit).