Filter
Top Products
Sony Notebook User Guide
Connecting peripheral devices
79
nN
Removing the floppy disk drive
To remove the floppy disk drive, proceed as follows:
❑ If your computer is on, wait until the LED indicator turns off and then unplug the USB cable from the
computer. If the floppy disk drive is not removed properly, your system may crash and you may lose data
that you did not save before.
❑ If your computer is off, you can directly unplug the USB cable from the computer.
✍ To carry your floppy disk drive when you have finished using it, fold the floppy disk cable into the compartment on the side of the floppy disk drive.
Connecting a USB printer
To connect a printer using the USB connector,
proceed as follows:
1 Plug an optional USB printer cable (1) into the
USB connector (2) identified by the symbol
on your computer and printer.
2 Plug the printer (3) power cord into an AC
outlet.
✍ Before using the printer, you may need to change the Printer
settings in the Device Manager (Start/Control Panel/double-
click System icon/select Hardware tab/click Device Manager
button).
Turn off your computer and the printer, unplug the AC adapter and
the power cord before connecting the printer.