Filter
Top Products
Sony VAIO Desktop User Guide
Getting help
91
nN
4 Have a look through the different tabs and check for abnormalities.
5 Restart your computer.
❑ The default setting for the printer port mode is correct for most printers, but you can try to change the
printer port mode, as follows:
1 Turn on the computer and press <F2> when the Sony logo appears.
The BIOS setup menu screen appears.
2 Use the keyboard’s arrow keys to select the Advanced menu.
3 Select I/O Device Configuration, then press the <Enter> key.
4 Select Parallel Port Mode, then press the <Enter> key.
5 Select a printer port option using the arrow keys, then press <Enter>.
The documentation delivered with your printer should give you the relevant port option.
6 Press <F10> to exit, or use the arrow keys to select Save and Exit..
The message Save configuration changes and exit now? appears.
7 Make sure that Yes is selected and then press <Enter>.
8 Your computer restarts.
When I remove a Memory Stick™, an error message appears
Insert the Memory Stick™ into the slot again and press <Enter>. Wait until the active application finishes,
then remove the Memory Stick™. If the message confirms the ejection of the Memory Stick™, click OK.