Filter
Top Products
VAIO Digital Studio™ User Guide
86
❑
When removing a slot cover, be careful not to damage components on the
system board or add-on cards. You may need to temporarily remove add-on
cards that are next to the slot cover you want to remove.
On Handling a CRT Display
❑
Do not change the CRT display refresh rate to 85 Hz, as DVD playback and
the DVgate software may not function correctly. Sony suggests that you keep
your CRT display at the preset, optimal refresh rate (75 Hz).
❑
Do not place the display near a strong magnetic force.
❑
Do not block the ventilation slots on the display.
❑
Using the computer in low temperature conditions may produce a residual
image on the screen. This is not a malfunction. When the computer returns to
normal temperature, the screen returns to normal.
❑
A residual image may appear on the screen if the same image is displayed
for a lengthy period of time. The image disappears after a period of time.
You can use a screen saver to prevent residual images.
❑
The screen becomes warm during operation. This is normal and does not
indicate a malfunction.
On Using the Hard Disk Drive
❑
Do not place the computer in a location that is subject to vibration or shock.
❑
Do not move the computer during operation.
❑
Do not subject the computer to sudden changes in temperature.
❑
Do not turn off the power while the computer is accessing the hard disk
drive.
On Handling Diskettes
❑
Do not open the shutter manually and touch the surface of the diskette.
❑
Keep diskettes away from magnets.
❑
Keep diskettes away from direct sunlight and other heat sources.