Filter
Top Products
Troubleshooting
219
Table of Contents
hours and then turn on the Reader.
If the battery is completely depleted, power will not be
supplied to the (Power) button, and you may not be able
to turn on the Reader. In this case, connect the Reader to
your computer via the supplied USB cable; the Reader will
turn on immediately. If the Reader does not turn on, press
the (Power) button. If the Charge/Busy indicator blinks
red 3 times, disconnect the USB cable from the Reader,
then reconnect approximately 5 minutes later.
The Reader cannot turn off or enter sleep mode.
If the Reader screen freezes and stops responding, the
(Power) button will also not work. In this case, reset the
Reader. See Details.
The Reader automatically enters sleep mode or turns off.
To conserve the battery’s charge, the Reader includes
automatic power saving modes. The Reader will enter sleep
mode after 10 minutes of inactivity. After 3 days* in sleep
mode, the Reader will shut down/power off automatically.
* If the battery’s charge is low, the Reader may
automatically turn off within 3 days. However, when
viewing a slideshow, this feature does not work. The
automatic power saving modes cannot be turned off.