Filter
Top Products
Battery
34
Table of Contents
To Description
Install the
Reader
software,
or transfer
data
Tap [Yes] to install the Reader software, or
transfer files from your computer to the Reader
while charging. The Reader cannot be operated
during transfer.
After the USB storage screen is displayed on the
Reader, it is detected on your computer, and the
“READER” and “SETUP” drives appear on your
computer.
When the icon* turns into the icon,
charging is complete.
When charging is complete, disconnect the USB
cable from the Reader and your computer.
After a short time, the [Home] screen will
appear.
* This icon is only displayed when the Reader is
in data transfer mode.
Charge the
Reader
Tap [No], or press the (Back) button, to return
to the previous screen.
Alternatively, press the (Home) button. The
[Home] screen appears. When the icon turns
into the icon, charging is complete.
In this mode, the Reader is not detected by your
computer*. When charging is complete,
disconnect the USB cable from the Reader and
your computer.
* This situation may vary, depending on the
settings of your computer.