Filter
Top Products
Remote control
The Remote control app enables you to use your tablet device as a remote control by registering it as the remote control of various
AV devices.
You can use the “gesture” remote control feature operated by gestures such as flicking or sliding as well as the “full” remote control
feature operated by tapping.
1. Tap
to start the Remote control app.
Hint
If you cannot find the icon to start the app, look for it in the application launcher displayed by tapping [ Apps] at the top right
of the Home screen.
Registering the remote control by setting the category and manufacturer of the device
The remote control is usually registered as follows.
1. Start the Remote control app.
2. Tap [
Register device] or [Register device].
3. Tap [Easy registration].
4. Register your tablet device as a remote control following the on-screen instructions.
Execute [Remote control test] if needed.
When you finished setting, the device list screen is displayed. Your tablet device can then be used as the remote.
Hint
If you cannot find the category or manufacturer, allow your tablet device to learn the remote control signal then register it.
Two or more devices may be displayed depending on the category or manufacturer. In this case, test the remote control
operation with every “Type” displayed and select the one that works correctly.
To register as a remote control for another device
Tap [ Register device] on the device list screen.
Learning the remote control signal and registering it
If you cannot find the category or manufacturer of the device at [Easy registration], register the remote control as follows.
1. Start Remote control app.
2. Tap [
Register device] or [Register device].
3. Tap [Learn from a remote control].
4. Select the category.
A remote control is displayed on the screen.
5. Tap the button you want to assign the signal to.
6. When the menu screen is displayed, tap [Learn remote commands].
7. Bring the remote control to be registered close to the IR data port of your tablet device, tap [Start], and press the button to be
learned on the remote control.
When the button is registered, the screen returns to display the remote control.