Sony VPL-CX75 Projector User Manual


 
GB
18 Location and Function of Controls
You can use a laser pointer or control the
presentation file made by Microsoft
PowerPoint when projecting the picture
using the Air Shot.
1 Laser transmitter
2 LASER key
Emits a laser beam from the laser
transmitter while you keep this key
pressed.
3 SLIDE G/g key
Used to change pages of the slide show
in the forward/backward direction.
4 B key
This key corresponds to the “B” key of a
keyboard.
When you press this key during the slide
show, a black screen is displayed. To
cancel the black screen, press this key
again.
To install batteries
Notes on laser beam
Do not look into the laser transmitter.
Do not aim the laser at people.
Notes on Remote Commander/
Presentation tool operation
Make sure that nothing obstructs the
infrared beam between the Remote
Commander/Presentation tool and the
remote control detector on the projector.
Direct the Remote Commander/
Presentation tool toward the front or rear
remote control detector.
The operation range is limited. The shorter
the distance between the Remote
Commander/Presentation tool and the
projector is, the wider the angle within
which the commander can control the
projector becomes.
Presentation Tool (VPL-CX75
only)
LASER
B
SLIDE
1
2
3
4
Open the cover (2) with a coin (1) and
remove the battery case (3). Install the two
size AAA (R03) batteries with the correct
polarity.