Filter
Top Products
24
Using a MENU
To clear the menu
Press the MENU key.
The menu disappears automatically if a key
is not pressed for one minute.
To reset items that have been
adjusted
Select the item that you want to reset, and
then press the RESET key on the Remote
Commander.
“Complete!” appears on the screen and the
setting of the item that you have selected is
factory preset values.
Storage of the settings
The settings are automatically stored in the
projector memory except the settings for
items (“Dot Phase,” “H Size” and “Shift”
etc.,) in the “Adjust Signal...” and the “Color
System” when the ENTER key is pressed.
If no signal is input
If there is no input signal, “Cannot adjust
this item.” appears on the screen.
Unadjustable items
Items that cannot be adjusted, depending on
the input signal, are not displayed on the
menu.
For details, see page 33.