28
The SET SETTING Menu
The SET SETTING Menu
The SET SETTING menu is used for changing the settings of the projector.
Setting items Functions Initial setting
Smart APA The APA (Auto Pixel Alignment) automatically
adjusts “Dot Phase,” “H Size” and “Shift” on the
INPUT SETTING menu for the input signal from a
computer.
• On: When a signal is input from a computer, the
APA functions automatically so that the picture can
be seen clearly. Once the specified input signal has
been adjusted by the “Smart APA,” it will not be
readjusted even when the cable is disconnected and
connected again or the input channel is changed. You
can adjust the picture by pressing the APA key on the
Remote Commander even if “Smart APA” set to
“On.”
• Off: The APA functions when you press the APA key
on the Remote Commander.
On
Auto Input Search When set to “On,” the projector detects input signals in
the following order: Input-A/Input-B (VPL-EX3 only)/
Video/S-Video. It indicates the input channel when the
power is turned on or the INPUT key is pressed.
Off
Input-A Signal Sel. Selects the “Component” or “Video GBR” signal input
via the INPUT A channel.
When a signal is input from a computer, this item is not
displayed on the screen because this unit automatically
recognizes the signal.
Component
Color System Selects the color system of the input signal.
If you select “Auto,” the projector detects the color
system of the input signal automatically. If the picture
is distorted or colorless, select the color system
according to the input signal.
Whenever the computer starts, the color system is set
to “Auto.”
Auto
Power Saving When set to “On,” the projector goes into power saving
mode if no signal is input for 10 minutes. Although the
lamp goes out, the cooling fan keeps running. The
power saving mode is canceled when a signal is input
or any key is pressed. In power saving mode, no keys
function for the first 45 seconds after the lamp goes
out.
Off
SET SETTING
Input-A
Smart APA: On
Auto Input Search:
Off
Input-A Signal Sel.:
Component
Color System: Auto
Power Saving: Off
IR Receiver: Front & Rear
Panel Key Lock: Off